IEI Integration ROCKY-3786 v4.10 - Manual (Page 94)

Page 94
ROCKY-3786EV CPU Card
Page 94
Disabled
BIOS does not search for the type of FDD drive by track
number. Note that there is no warning message if the
drive installed is 360K.
Enabled (Default) BIOS searches for a FDD to determine if it has 40 or 80
tracks. Note that BIOS cannot tell the difference between
720K, 1.2M or 1.44M drives as they all have 80 tracks.
Boot Up Numlock Status [On]
Use the Boot Up Numlock Status option to specify the default state of the numeric
keypad.
Off The keys on the keypad are not activated.
On
(Default) Activates the keys on the keypad.
Gate A20 Option [Fast]
Use the Gate A20 Option to set if the keyboard controller or the chipset controls the Gate
A20 switching.
Normal The keyboard controller does the switching.
Fast (Default) The chipset does the switching.
Typematic Rate Setting [Disabled]
Use the Typematic Rate Setting configuration option to specify if only one character is
allowed to appear on the screen if a key is continuously held down. When this option is
enabled, the BIOS reports as before, but it then waits a moment, and, if the key is still held
down, it begins to report that the key has been pressed repeatedly. This feature
accelerates cursor movement with the arrow keys.
Disabled (Default) Disables the typematic rate.
Enabled Enables the typematic rate.