IEI Integration PCIE-G41A2 - Manual (Page 104)

PCIE-G41A2 PICMG 1.3 CPU card
Page 92
Memory Remap Feature [Enabled]
Use the Memory Remap Feature option to allow the overlapped PCI memory above the
total physical memory to be remapped.
Disabled Overlapped PCI memory cannot be remapped
Enabled D EFAULT Overlapped PCI memory can be remapped
Memory Hole [Disabled]
Use the Memory Hole option to reserve memory space between 15 MB and 16 MB for
ISA expansion cards that require a specified area of memory to work properly. If an older
ISA expansion card is used, please refer to the documentation that came with the card to
see if it is necessary to reserve the space.
Disabled D EFAULT Memory is not reserved for ISA expansion cards
15 MB–16 MB Between 15 MB and 16 MB of memory is reserved
for ISA expansion cards
Initiate Graphic Adapter
Use the Initiate Graphic Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration
options are listed below:
IGD
PCI/IGD
PCI/PEG
PEG/IGD
PEG/PCI D EFAULT
IGD Graphics Mode Select [Enable, 32 MB]
Use the IGD Graphic Mode Select option to specify the amount of system memory that
can be used by the internal graphics device.