B.2.5 create factory default image, Figure b-7: press f3 to boot into recovery mode, Figure b-8: recovery tool menu – IEI Integration PCIE-G41A2 User Manual
Page 123
PCIE-G41A2 PICMG 1.3 CPU card
Page 111
B.2.5 Create Factory Default Image
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
Step 1:
Turn on the system. When the following screen displays (Figure B-7), press the
<F3> key to access the recovery tool. The message will display for 10 seconds,
please press F3 before the system boots into the operating system.
Figure B-7: Press F3 to Boot into Recovery Mode
Step 2:
The recovery tool menu appears. Type <4> and press <Enter>. (Figure B-8)
Figure B-8: Recovery Tool Menu
Step 3:
The About Symantec Ghost window appears. Click OK button to continue.