IEI Integration PCIE-Q670 v2.00 - Manual (Page 73)

PCIE-Q670 PICMG 1.3 CPU Card
Page 58
Step 3: Insert the cable connectors . Once the cable connectors are properly aligned
with the USB connectors on the PCIE-Q670 Series, connect the cable
connectors to the on-board connectors. See Figure 4-14.
Figure 4-14: Dual USB Cable Connection
Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis.
4.5.5 PCIe Mini Card Installation
To install the PCIe Mini card, please refer to the diagram and instructions below.