IEI Integration PCIE-Q670 v2.00 - Manual (Page 75)

PCIE-Q670 PICMG 1.3 CPU Card
Page 60
Figure 4-16: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
4.6.2 USB Device Connection (Single Connector)
There are two external USB 2.0 connectors. Both connectors are perpendicular to the
PCIE-Q670 Series. To connect a USB 2.0 or USB 1.1 device, please follow the
instructions below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in Chapter 3
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the PCIE-Q670 Series. See Figure 4-17.