IEI Integration PICOe-PV-D4251_N4551_D5251 v1.11 - Manual (Page 71)

PICOe-PV-D4251/N4551/D5251 User Manual
Page 57
Figure 4-13: SATA Power Drive Connection
4.7.4 USB Cable (Dual Port) with Slot Bracket
The PICOe-PV-D4251/N4551/D5251 is shipped with a dual port USB 2.0 cable. To
connect the USB cable connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the PICOe-PV-D4251/N4551/D5251 USB
connector.
Step 3: Insert the cable connectors . Once the cable connectors are properly aligned
with the USB connectors on the PICOe-PV-D4251/N4551/D5251, connect the
cable connectors to the on-board connectors. See Figure 4-14.