IEI Integration PICOe-PV-D4251_N4551_D5251 v1.11 - Manual (Page 79)

PICOe-PV-D4251/N4551/D5251 User Manual
Page 65
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
PICOe-PV-D4251/N4551/D5251. See
7
Figure 4-21.
Figure 4-21: VGA Connector
Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
4.9 Software Installation
All the drivers for the PICOe-PV-D4251/N4551/D5251 are on the CD that came with the
system. To install the drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"