IEI Integration ICE-945GSE v1.11 - Manual (Page 85)

ICE-945GSE COM Express Type 2 Module
Page 73
Normally if this option is not enabled, any attached USB mouse or USB keyboard does not
become available until a USB compatible operating system is fully booted with all USB
drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard
can control the system even when there is no USB driver loaded onto the system.
Disabled Legacy USB support disabled
Enabled D EFAULT Legacy USB support enabled
Auto Legacy USB support disabled if no USB devices are
connected
USB 2.0 Controller Mode [HiSpeed]
Use the USB 2.0 Controller Mode option to set the speed of the USB2.0 controller.
FullSpeed The controller is capable of operating at 12 Mb/s
HiSpeed D EFAULT The controller is capable of operating at 480 Mb/s
6.3.10 IEI Feature
Use the IEI Feature menu (BIOS Menu 15) to configure One Key Recovery function.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
iEi Feature
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Auto Recovery Function
[Disabled]
Select Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 15: IEI Feature