IEI Integration KINO-945GSE v1.07 - Manual (Page 147)

KINO-945GSE Motherboard
Page 131
Î Boot Display Device [Auto]
The Boot Display Device BIOS option selects the display device the system uses when it
boots. The available options are listed below:
ƒ Auto D
EFAULT
ƒ CRT
ƒ TV
ƒ EFP
ƒ LFP
Î LVDS1 Panel Type
Use the LVDS Panel Type to determine the LCD panel resolution. Configuration options
are listed below:
ƒ 640 x 480 18-bit
ƒ 800 x 480 18-bit
ƒ 800 x 600 18-bit
ƒ 1024 x 768 18-bit
ƒ 1280 x 1024 36-bit
ƒ 1400 x 1050 36-bit
ƒ 1440 x 900 36-bit
ƒ 1600 x 1200 36-bit
ƒ by H/W Default
Î LCD Brightness Control
Use the LCD Brightness Control option to specify the brightness of the LCD panel as a
percentage. Default setting is 100%
Î TV Standard
The TV Standard option specifies the TV type connected to the system.
ƒ VBIOS Default
ƒ NTSC
ƒ PAL