Figure 5-13: dual usb cable connection – IEI Integration KINO-945GSE v1.07 User Manual
Page 99
Advertising
KINO-945GSE Motherboard
Page 83
Step 2:
Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the KINO-945GSE USB connector.
Step 3:
Insert the cable connectors. Once the cable connectors are properly aligned
with the USB connectors on the KINO-945GSE, connect the cable connectors to
the on-board connectors. See Figure 5-13.
Figure 5-13: Dual USB Cable Connection
Step 4:
Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis.
Step 0:
Advertising