Figure 5-4: cooling kit support bracket, Figure 5-5: connect the cooling fan cable – IEI Integration KINO-9453 v2.00 User Manual
Page 81
Advertising
KINO-9453 Mini-ITX Motherboard
Page 63
Figure 5-4: Cooling Kit Support Bracket
Step 4:
Tighten the screws. Use a screwdriver to tighten the four screws. Tighten each
nut a few turns at a time and do not over-tighten the screws.
Step 5:
Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the motherboard. Carefully route the cable and avoid heat generating chips
and fan blades. See Figure 5-5.
Step 0:
Figure 5-5: Connect the cooling fan cable
Advertising