2 clear cmos jumper, Figure 5-8: at/atx power select jumper location, See figure 5-8 – IEI Integration KINO-9453 v2.00 User Manual

Page 85: Own in figure 5-8

Advertising

KINO-9453 Mini-ITX Motherboard

Page 67

Figure 5-8: AT/ATX Power Select Jumper Location

5.4.2 Clear CMOS Jumper

Jumper Label:

JP3

Jumper Type:

3-pin header

Jumper Settings:

See Table 5-3

Jumper Location:

See Figure 5-9

If the KINO-9453 fails to boot due to improper BIOS settings, the clear CMOS jumper

clears the CMOS data and resets the system BIOS information. To do this, use the jumper

cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1

and 2.

If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault

may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the

following:

Advertising