IEI Integration KINO-G410 v2.00 - Manual (Page 60)

KINO-G410 Min i-ITX Mo th e rb o a rd
P a g e 48
Figure 4-11: SATA Power Drive Connection
4.5.2 US B Ca b le (Du a l P o rt) with S lo t Bra c ke t
The KINO-G410 is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
S te p 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
S te p 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the KINO-G410 USB connector.