IEI Integration KINO-G410 v2.00 - Manual (Page 64)

KINO-G410 Min i-ITX Mo th e rb o a rd
P a g e 52
Figure 4-15: LAN Connection
S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. S te p 0:
4.6.4 S e ria l De vic e Co n n e c tio n
The KINO-G410 has three male DB-9 connectors on the external peripheral interface
panel for a serial device. Follow the steps below to connect a serial device to the
KINO-G410.
S te p 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
S te p 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-16.