Figure c-14: select a local source drive – IEI Integration KINO-QM670 v1.04 User Manual
Page 146
Advertising
KINO-QM670 Mini-ITX SBC
Page 131
Figure C-14: Select a Local Source Drive
Step 6:
Select a source partition (Part 1) from basic drive as shown in Figure C-15.
Then click OK.
Figure C-15: Select a Source Partition from Basic Drive
Step 7:
Select 1.2: [Recovery] NTFS drive and enter a file name called
iei
(Figure C-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be
iei.GHO
.
Advertising