IEI Integration KINO-QM670 v1.04 - Manual (Page 33)

KINO-QM670 Mini-ITX SBC
Page 18
CN Type: 2-pin wafer (1x2)
CN Location: See Figure 3-3
CN Pinouts: See Table 3-4
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.
Figure 3-3: Battery Connector Location
Pin Description
1 BAT (+3.3V)
2 GND
Table 3-4: Battery Connector Pinouts
3.2.3 Backlight Inverter Connector
CN Label: INVERTER1
CN Type: 5-pin wafer (1x5)
CN Location: See Figure 3-4
CN Pinouts: See Table 3-5
The backlight inverter connector provides the backlight on the LCD display connected to
the KINO-QM670 with +12V of power.