IEI Integration KINO-PV-D4253_D5253 - Manual (Page 127)

P age 115
K INO-P V-D5253-D4253 Mini-ITX Motherboard
C .5 Other Information
C .5.1 Us ing AHC I Mode or AL i M5283 / VIA VT6421A C ontroller
When the system uses AHCI mode or some specific SATA controllers such as ALi M5283
or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key
recovery. Please follow the steps below to install the SATA RAID/AHCI driver.
Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into a USB
floppy disk drive. The SATA RAID/AHCI driver must be especially designed for
the on-board SATA controller.
Connect the USB floppy disk drive to the system.
Insert the One Key Recovery CD into the system and boot the system from the CD.
When launching the recovery tool, press <F6>.
When the following window appears, press <S> to select “Specify Additional Device”.