IEI Integration KINO-PV-D4253_D5253 - Manual (Page 56)

P age 44
K INO-P V-D5253-D4253 Mini-ITX Motherboard
Figure 4-4: COM 6 Function Select Jumper Location
4.5 Internal P eripheral Device C onnections
This section outlines the installation of peripheral devices to the onboard connectors.
4.5.1 S ATA Drive C onnection
The KINO-PV-D5253/D4253 is shipped with one SATA drive cables. To connect the SATA
drives to the connectors, please follow the steps below.
Locate the connectors. The locations of the SATA drive connectors are shown in
Chapter 3.
Insert the cable connector. Press the clip on the connector at the end of the SATA cable
and insert the cable connector into the on-board SATA drive connector. See
Figure 4-5