IEI Integration KINO-DH610 - Manual (Page 29)

KINO-DH610
Page 17
3.1.3 External Interface Panel Connectors
The table below lists the connectors on the external I/O panel.
Connector Type Label
Audio connector Audio jack AUDIO_JACK2
Ethernet and USB connector RJ-45, USB port LAN1_USB1,
LAN1_USB2
HDMI connector HDMI port HDMI1
Power connector 4-pin Mini-DIN DC_IN1
RS-232 serial port DB-9 male COM1
VGA and DVI connector 15-pin female,
24-pin female
DVI_CRT1
Table 3-2: Rear Panel Connectors
3.2 Internal Peripheral Connectors
The section describes all of the connectors on the KINO-DH610.
3.2.1 Battery Connector
CN Label: BAT2
CN Type: 2-pin wafer
CN Location: See Figure 3-2
CN Pinouts: See Table 3-3
The battery connector is connected to the system battery. The battery provides power to
the system clock to retain the time when power is turned off.