IEI Integration KINO-DH610 - Manual (Page 90)

KINO-DH610
Page 78

Manual by
PWM
The fan spins at the speed set in Manual by PWM
settings
 Target Temp. Sensor [CPU Temperature]
Use the Target Temp. Sensor option to set the target CPU temperature.

CPU
Temperature
D EFAULT Sets the target temperature sensor to the CPU
temperature.

System
Temperature1
Sets the target temperature sensor to the System
Temperature1 setting.

System
Temperature2
Sets the target temperature sensor to the System
Temperature2 setting.
 Temperature Bound n
Use the + or – key to change the fan Temperature Bound n value. Enter a decimal
number between 0 and 127.
 Segment n Speed (%)
Use the + or – key to change the fan Segment n Speed value in percentage. Enter a
decimal number between 0 and 100.
 Full Speed Count
Use the + or – key to change the fan Full Speed Count value. Enter a decimal number
between 500 and 15000.
5.3.7.2 SYS Fan 1 Configuration
Use the SYS Fan 1 Configuration submenu (BIOS Menu 13) to configure SYS Fan 1
temperature and speed settings.