B.2.4 building the recovery partition, Figure b-6: launching the recovery tool, N b.2.4 ) – IEI Integration KINO-AH612 User Manual
Page 122: B.2.4 ) o
Advertising
KINO-AH612
Page 111
B.2.4 Building the Recovery Partition
Step 1:
Put the recover CD in the optical drive.
Step 2:
Start the system.
Step 3:
Boot the system from the recovery CD. When prompted, press any key to
boot from the recovery CD. It will take a while to launch the recovery tool. Please
be patient!
Figure B-6: Launching the Recovery Tool
Step 4:
When the recovery tool setup menu appears, press <2> then <Enter>.
Figure B-7: Manual Recovery Environment for Windows
Advertising