IEI Integration KINO-AQ870 - Manual (Page 62)

KINO-AQ870
P a g e 50
To install the cooling kit, follow the instructions below.
S te p 1: A cooling kit bracket is pre-installed on the rear of the motherboard. See Figure
4-5.
Figure 4-5: Cooling Kit Support Bracket
S te p 2: Place the cooling kit onto the socket LGA1150 CPU. Make sure the CPU
cable can be properly routed when the cooling kit is installed.
S te p 3: Mount the cooling kit. Gently place the cooling kit on top of the CPU. Make
sure the four threaded screws on the corners of the cooling kit properly pass
through the holes of the cooling kit bracket.
S te p 4: Secure the cooling kit by fastening the four retention screw of the cooling kit.
S te p 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the KINO-AQ870. Carefully route the cable and avoid heat generating chips
and fan blades.
4.3.3 DIMM In s ta lla tio n
To install a DIMM, please follow the steps below and refer to Figure 4-6.