IEI Integration KINO-AQ870 - Manual (Page 71)

KINO-AQ870
P a g e 59
Figure 4-14: USB Connector
4.5.7 VGA Mo n ito r Co n n e c tio n
The KINO-AQ870 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the KINO-AQ870, please follow the instructions below.
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
KINO-AQ870. See Figure 4-15.