IEI Integration IMB-Q354 v1.10 - Manual (Page 63)

IMB-Q354 microATX Motherboard
Page 63
Figure 4-4: Insert the Socket LGA775 CPU
Step 8: Close the CPU socket. Close the load plate and engage the load lever by
pushing it back to its original position. Secure the load lever under the retention
tab on the side of CPU socket.
Step 9: Connect the CPU 12V cable to the 12V power. After the cooling kit is installed
connect the CPU cable to the CPU 12V power connector. Step 0:
4.4.2 Socket LGA775 CF-520 Cooling Kit Installation
WARNING:
It is strongly recommended that you DO NOT use the original heat
sink and cooler provided by Intel® on the IMB-Q354.
IEI’s cooling kit (CF-520) includes a support bracket that is combined
with the heat sink mounted on the CPU to counterweigh and balance
the load on both sides of the PCB.