IEI Integration IMB-Q354 v1.10 - Manual (Page 77)

IMB-Q354 microATX Motherboard
Page 77
Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis. Step 0:
4.7.4 PCIe x16 Expansion Card Installation
A PCIe x16 expansion card can be installed on the IMB-Q354 using the PCIe x16
expansion slot. To install a PCIe expansion card into the PCIe socket, please follow the
steps below and refer to Figure 4-16.
Figure 4-16: PCIe x16 Installation
Step 1: Locate the PCIe x16 socket. Place the IMB-Q354 on an anti-static pad with the
solder side facing up.
Step 2: Align the PCIe x16 card with the socket. The PCIe x16 card must be aligned
so the notch on the PCIe x16 card aligns with the plastic bridge in the socket.
Step 3: Insert the PCIe x16 card. Push the PCIe x16 card into the socket,
perpendicular to the IMB-Q354.