IEI Integration IMB-Q354 v1.00 - Manual (Page 153)

IMB-Q354 uATX Motherboard
Page 131
master/slave designation for SATA devices, each device is treated as a
master, and hardware-assisted native command queuing.
Use the AHCI Settings menu (BIOS Menu 10) to report on the auto-detection of devices
connected to the onboard SATA drive connectors.
BIOS Menu 10: AHCI Configuration
AHCI Port n [Not Detected]
Use the AHCI Port n BIOS option to check what AHCI (Advanced Host Controller
Interface) devices are detected to a specified SATA drive connector. If a device is
detected, selecting the BIOS option, e.g. “AHCI Port 3” opens a new window.
6.3.7.1 AHCI Port n
Use the AHCI Port n configuration menu (BIOS Menu 11) to configure the drive
connected to SATA connector n.