Figure 4-2: remove protective cover, Figure 4-3: cpu socket load plate – IEI Integration IMB-Q670 v1.00 User Manual
Page 62
Advertising
IMB-Q670 Micro-ATX Motherboard
Page 50
Step 1:
Remove the protective cover. The black protective cover can be removed by
pulling up on the tab labeled "Remove". See Figure 4-2.
Figure 4-2: Remove Protective Cover
Step 2:
Open the socket. Disengage the load lever by pressing the lever down and
slightly outward to clear the retention tab. Fully open the lever, then open the
load plate. See Figure 4-3.
Figure 4-3: CPU Socket Load Plate
Step 3:
Inspect the CPU socket. Make sure there are no bent pins and make sure the
socket contacts are free of foreign material. If any debris is found, remove it with
compressed air.
Advertising