IEI Integration IMB-Q670 v1.00 - Manual (Page 71)

IMB-Q670 Micro-ATX Motherboard
Page 59
CN Type: 3-pin header
CN Location: See Figure 4-12
CN Pinouts: See Table 4-6
The Wake-on LAN connector allows the user to enable or disable the Wake-on LAN (WOL)
function.
Figure 4-12: Wake-on LAN Connector Pinout Locations
PIN NO. DESCRIPTION
Short 1-2 Wakeup Enable (Default)
Short 2-3 Disable
Table 4-6: Wake-on LAN Connector Pinouts
4.4 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors.
4.4.1 SATA Drive Connection
The IMB-Q670 is shipped with four SATA drive cables. To connect the SATA drives to the
connectors, please follow the steps below.