IEI Integration IMB-H612A - Manual (Page 157)

IMB-H612 Mic ro -ATX Mo th e rb o a rd
P a g e 142
Figure B-14: Select a Local Source Drive
S te p 6: Select a source partition (Part 1) from basic drive as shown in Figure B-15.
Then click OK.
Figure B-15: Select a Source Partition from Basic Drive
S te p 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei
(Figure B-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO .