IEI Integration IMB-H612A - Manual (Page 99)

IMB-H612 Mic ro -ATX Mo th e rb o a rd
P a g e 84
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2D8h;
IRQ=10
Serial Port I/O port address is 2D8h and the interrupt
address is IRQ10

IO=2C0h;
IRQ=10, 11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11

IO=2C8h;
IRQ=10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11

IO=2D0h;
IRQ=10, 11
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ10, 11

IO=2D8h;
IRQ=10, 11
Serial Port I/O port address is 2D8h and the interrupt
address is IRQ10, 11

IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11
 Device Mo d e [No rm al]
Use the Device Mode option to enable or disable the serial port.

Normal D EFAULT Sets the serial port mode to normal.

RS485 Enables serial port RS-485 support.
5.3.8 H/W Mo n ito r
The H/W Monitor menu (BIOS Menu 12) contains the fan configuration submenus and
displays operating temperature, fan speeds and system voltages.