IEI Integration IMB-Q870-i2 - Manual (Page 123)

IMB-Q870-i2 microATX Motherboard
Page 107
Î Parity [None]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.
Î
None D EFAULT No parity bit is sent with the data bits.
Î
Even The parity bit is 0 if the number of ones in the data
bits is even.
Î
Odd The parity bit is 0 if the number of ones in the data
bits is odd.
Î
Mark The parity bit is always 1. This option does not
provide error detection.
Î
Space The parity bit is always 0. This option does not
provide error detection.
Î Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.
Î
1 D EFAULT Sets the number of stop bits at 1.
Î
2 Sets the number of stop bits at 2.