4 lan connection, 5 ps/2 keyboard and mouse connection, Figure 4-16: lan connection – IEI Integration IMBA-C2060 v2.01 User Manual
Page 82
IMBA-C2060 ATX Motherboard
Page 66
4.5.4 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1:
Locate the RJ-45 connectors. The locations of the LAN connectors are shown
in Chapter 3.
Step 2:
Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the IMBA-C2060. See Figure 4-16.
Figure 4-16: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
Step 0:
4.5.5 PS/2 Keyboard and Mouse Connection
The IMBA-C2060 has a dual PS/2 connector on the external peripheral interface panel.
The dual PS/2 connector is used to connect to a keyboard and mouse to the system.
Follow the steps below to connect a keyboard and mouse to the IMBA-C2060.