IEI Integration IMBA-C2060 v2.01 - Manual (Page 83)

IMBA-C2060 ATX Motherboard
Page 67
Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is
shown in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the appropriate PS/2 connector on the external peripheral
interface connector. See Figure 4-17.
Figure 4-17: PS/2 Keyboard/Mouse Connector
4.5.6 Serial Device Connection
The IMBA-C2060 has a single male D-sub 9 connector on the external peripheral interface
panel for a serial device. Follow the steps below to connect a serial device to the
IMBA-C2060.
Step 1: Locate the D-sub 9 connector. The location of the D-sub 9 connector is shown
in Chapter 3.
Step 2: Insert the serial connector. Insert the D-sub 9 connector of a serial device into
the D-sub 9 connector on the external peripheral interface. See Figure 4-18.