IEI Integration IMBA-Q670 v1.02 - Manual (Page 85)

IMBA-Q670 ATX Motherboard
Page 69
Figure 4-19: USB Connector
4.5.8 VGA Monitor Connection
The IMBA-Q670 has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the IMBA-Q670, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
IMBA-Q670. See Figure 4-20.