Figure b-2: launching the recovery tool, Figure b-3: recovery tool setup menu – IEI Integration IMBA-Q670 v2.10 User Manual
Page 170
Advertising
IMBA-Q670 ATX Motherboard
Page 154
Step 2:
Boot the system from recovery CD. When prompted, press any key to boot
from the recovery CD. It will take a while to launch the recovery tool. Please be
patient!
Figure B-2: Launching the Recovery Tool
Step 3:
The recovery tool setup menu is shown as below.
Figure B-3: Recovery Tool Setup Menu
Step 4:
Press <6> then <Enter>.
Advertising