AT&T E5813B - Manual (Page 11)

8
Getting started
Installation options
Tabletop mount Wall mount
Telephone outlet
mounting plate
with mounting
studs
1. To remove the bracket, hold the telephone
base in both hands, press the two bracket
tabs and lift the bracket away from slots
and .
2. Connect the telephone line cord and power
adapter to the jacks on the bottom of the
telephone base. Bundle the telephone cord,
and secure it with a twist tie before placing it
inside the bracket.
Wall mounting
The telephone base comes with the bracket mounted for tabletop use. If wall
mounting is desired, a telephone outlet wall mounting plate with mounting studs is
required. This mounting plate with studs may be available for purchase from many
hardware or consumer electronics retailers and may require professional installation.
NOTE: The mounting bracket must be used for both tabletop use and wall mounting positions.