IEI Integration NANO-9453 v1.0 User Manual
Page 91
NANO-9453 EPIC Motherboard
Page 73
Step 4:
Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket
out and push the rear of the SO-DIMM down. (See Figure 5-6)
Step 5:
Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket.
Step 0:
5.3.4 CF Card Installation
NOTE:
The NANO-9453 can support both CF Type I cards and CF Type II
cards. For the complete specifications of the supported CF cards
please refer to Chapter 2.
To install the a CF card (Type 1 or Type 2) onto the NANO-9453, please follow the steps
below:
Step 1:
Locate the CF card socket. Place the NANO-9453 on an anti-static pad with
the solder side facing up. Locate the CF card.
Step 2:
Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3:
Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-7.
Step 0: