IEI Integration NOVA-HM551 v1.00 - Manual (Page 104)

NOVA-HM551 5.25" SBC
Page 90
Î
Disabled Disable the parallel port
Î
Enabled D EFAULT Enable the parallel port
Î Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.
Î
Auto D EFAULT The parallel port IO port address and interrupt
address are automatically detected.
Î
IO=378h;
IRQ=7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7
Î
IO=278h;
IRQ=7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ7
Î
IO=3BCh;
IRQ=7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ7
Î
IO=378h Parallel Port I/O port address is 378h
Î
IO=278h Parallel Port I/O port address is 278h
Î
IO=3BCh Parallel Port I/O port address is 3BCh
Î Device Mode [Standard and Bi-direction (SPP) mode]
Use the Device Mode option to select the mode the parallel port operates in.
ƒ Standard and Bi-direction (SPP) mode
ƒ EPP-1.9 and SPP mode
ƒ ECP mode
ƒ ECP and EPP 1.9 mode
ƒ Printer mode
ƒ EPP 1.7 and SPP mode
ƒ ECP and EPP 1.7 mode