5 four serial port connector – IEI Integration NOVA-HM551 v1.00 User Manual
Page 80
Advertising
NOVA-HM551 5.25" SBC
Page 66
Step 4:
Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 4-16.
Figure 4-16: SATA Drive Connection
4.7.5 Four Serial Port Connector
The 40-pin serial port connector connects the board connector to four DB-9 connectors.
To install, please follow the steps below.
Step 1:
Locate the COM connector. The locations of the COM port connectors are
shown in Chapter 4.
Step 2:
Insert the cable connector. Align the cable connector with the onboard
connector. Make sure pin 1 on the board and connector line up.
Advertising