IEI Integration ECW-281B-N270-WT v2.00 - Manual (Page 141)

ECW-281B Embedded System
Page 125
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the ECW-281B/281B2-R20.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
Follow the electrostatic precautions outlined below whenever the
ECW-281B/281B2-R20 is opened.
Make sure the power is turned off and the power cord is disconnected
whenever the ECW-281B/281B2-R20 is being installed, moved or modified.
Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
Electric shocks can occur if the ECW-281B/281B2-R20 chassis is opened
when the ECW-281B/281B2-R20 is running.
Do not drop or insert any objects into the ventilation openings of the
ECW-281B/281B2-R20.
If considerable amounts of dust, water, or fluids enter the
ECW-281B/281B2-R20, turn off the power supply immediately, unplug the
power cord, and contact the ECW-281B/281B2-R20 vendor.
DO NOT:
o Drop the ECW-281B/281B2-R20 against a hard surface.
o In a site where the ambient temperature exceeds the rated temperature