IEI Integration UPC-V312-D525 v1.02 - Manual (Page 36)

UPC-V312-D525 Panel PC
Page 22
3.4 CF Card Installation
The UPC-V312-D525 has one CF Type II slot. To install the CF card, follow the
instructions below.
Step 1: Locate the CF card socket . The CF card socket is located on the left side panel
of the UPC-V312-D525.
Step 2: Remove the CF card slot panel by removing the four retention screws.
NOTE:
Please use the screw driver that comes with the UPC-V312-D525 to
remove the screws on the chassis.
Figure 3-1: Remove the CF Card Slot Panel
Step 3: Install the CF Card . Correctly align the CF card with the socket and insert the
CF card into the socket. See
55
Figure 3-2 .