IEI Integration UPC-V312-D525 v1.10 - Manual (Page 50)

UPC-V312-D525 Panel PC
Page 37
3.7.7 Power Input 1, 3-pin Terminal Block
CN Label: POWER 1
CN Type: 3-pin terminal block
CN Location: See Figure 1-4
CN Pinouts: See Figure 3-25
Connect the leads of a 9V~36V DC power supply into the terminal block. Make sure that
the power and ground wires are attached to the correct sockets of the connector.
Figure 3-25: 3-pin Terminal Block Pinouts
3.7.8 Power Input 2, DIN Connector
CN Label: POWER 2
CN Type: DIN connector
CN Location: See Figure 1-4
The power connector connects to the 10.5 V ~ 36 V DC power adapter.
3.7.9 RJ-45 RS-232 Serial Port
CN Label: RS 232
CN Type: RJ-45
CN Location: See Figure 1-4
CN Pinouts: See Table 3-3 and Figure 3-26
A RS-232 serial port device can be connected to the RJ-45 RS-232 serial port on the
bottom panel. The pinouts of the RJ-45 RS-232 serial port is shown below.