IEI Integration S12A v1.12 - Manual (Page 37)

SAILORPC-12A Panel PC
Page 27
Figure 3-14: Serial Device Connector
Step 3: Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
3.7.4 USB Device Cable
To connect USB devices, please follow the instructions below.
Step 1: Located the USB connectors . The locations of the USB connectors are shown
in Chapter 2.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See Figure 3-15.
Figure 3-15: USB Device Connection