IEI Integration UPC-V315-NM70 - Manual (Page 113)

UP C-V315-NM70 P a n e l P C
P a g e 102
Figure B-14: Select a Local Source Drive
S te p 6: Select a source partition (Part 1) from basic drive as shown in Figure B-15.
Then click OK.
Figure B-15: Select a Source Partition from Basic Drive
S te p 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei
(Figure B-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO .