IEI Integration PPC-37xx-N270 v1.01 - Manual (Page 79)

PPC-37xx-N270 Panel PC
Page 63
Figure 4-35: Serial Device Connector
Step 3: Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
S te p 0 :
4.14.4 USB Device Connection
There are four external USB 2.0 connectors. All connectors are perpendicular to the
PPC-37xx-N270. To connect a USB 2.0 or USB 1.1 device, please follow the instructions
below.
Step 1: Locate the USB connectors . The locations of the USB connectors are shown
in Chapter 2.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See Figure 4-36.