IEI Integration AFL-15i-HM55 v2.00 - Manual (Page 46)

AFL-HM55 Series Panel PC
Page 35
Figure 3-12: COM3 RX Function Select Jumper Location
3.9.8 ME Debug Mode Jumper
Jumper Label: JP12
Jumper Type: 2-pin header
Jumper Settings: See Table 3-11
Jumper Location: See Figure 3-13
The ME Debug Mode jumper allows ME firmware overwrite protection. The ME Debug
Mode jumper settings are shown in Table 3-11.
ME Debug Mode Description
Open Disabled
Closed Enabled
Table 3-11: ME Debug Mode Jumper Settings
The ME Debug Mode jumper location is shown in Figure 3-13.