IEI Integration AFL-07A 08AH 10A 12A-LX Series - Manual (Page 103)

AFOLUX LX Series Flat Panel PC
Page 89
Init Display First [Onboard]
Use the Init Display First option to select the primary display device.
PCI Slot The display connected to the PCI slot is the primary
display.
Onboard (Default) The display connected to the onboard connector is the
primary display.
Reset Configuration Data [Disabled]
Use the Reset Configuration Data option to reset the Extended System Configuration
Data (ESCD) when exiting setup if booting problems occur after a new add-on is installed.
Disabled (Default) ESCD will not be reconfigured
Enabled ESCD will be reconfigured after you exit setup
Resources Controlled By [Auto (ESCD)]
Use the Resources Controlled By option to either manually configure all the boot and
plug and play devices, or allow BIOS to configure these devices automatically. If BIOS is
allowed to configure the devices automatically IRQs, DMA and memory base address
fields cannot be set manually.
Auto(ESCD) (Default) BIOS automatically configures plug and play devices as
well as boot devices.
Manual
Manually configure the plug and play devices and any
other boot devices.
x IRQ Resources [Press Enter]
The IRQ Resources option can only be selected if the Resources Controlled By option is
set to Manual.