5 cf card installation, Nstallation, Figure 3-1: back cover retention screws – IEI Integration AFL-LX-Series v2.10 User Manual
Page 38
AFOLUX LX Series Flat Panel PC
Page 38
1
128MB CompactFlash® card with Windows
CE 5.0 pre-installed and SDK
1
1GB CompactFlash® card with Windows
XPE pre-installed
Step 2:
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
3.5 CF Card Installation
WARNING:
Over-tightening back cover screws will crack the plastic frame.
Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
The AFOLUX LX series has one CF Type II slot inside the rear panel. To install the CF
card, follow the instructions below.
Step 1:
Remove the nine retention screws (
4
) and lift the cover off the flat
Figure 3-1: Back Cover Retention Screws
Step 2:
For AFL-08AH-LX, lift the cover off and pull down the cover a bit to make it
possible to lift the cover further more after removing the nine retention screws