IEI Integration AFL-08B-N270 v1.00 User Manual

Page 21

Advertising

AFL-08B-N270 User Manual

Page 21

WARNING:

When installing the AFL-08B-N270, make sure to:

Turn the power off: Chance of electrocution. Turn off the monitor and

unplug it from the power supply.

Only let certified engineers change the hardware settings: Incorrect

settings can cause irreparable damage to the product.

Install the monitor with assistance: The product is very heavy and may be

damaged by drops and bumps. Two or more people should install the panel

PC.

Take anti-static precautions: Electrostatic discharge can destroy electrical

components and injure the user. Users must ground themselves using an

anti-static wristband or similar device.

The installation steps below should be followed in order.

Step 1:

Unpack the panel PC

Step 2:

Check all the required parts are included

Step 3:

Install the CompactFlash® card

Step 4:

Mount the panel PC

Step 5:

Connect peripheral devices to the bottom panel of the panel PC

Step 6:

Connect the power cable

Step 7:

Configure the system

Advertising