10 reset the system, 11 powering on the system, Eset the – IEI Integration AFL2-W19A-H61 v1.21 User Manual
Page 81: Ystem, Owering, N the, Figure 5-14: clear cmos switch location, Figure 5-15: reset button location, 11 p o we rin g on th e s ys te m
AFL2-W19A/AB-H61
P a g e 61
the clear CMOS switch to clear CMOS mode for a few seconds then reinstall the clear
CMOS switch back to keep CMOS mode.
S te p 1:
Locate the clear CMOS switch on the bottom panel (Figure 5-14).
Figure 5-14: Clear CMOS Switch Location
S te p 2:
Adjust the clear CMOS switch.
S te p 0:
5.10 Re s e t th e S ys te m
The reset button enables user to reboot the system when the system is turned on. To
reboot the system, follow the steps below.
S te p 1:
Locate the reset button on the bottom panel (Figure 5-15).
Figure 5-15: Reset Button Location
S te p 2:
Press the reset button.
S te p 0:
5.11 P o we rin g On th e S ys te m
To power on the system, follow the steps below:
S te p 1:
Locate the Function and Brightness Up function keys. See Section 1.2.1.1.